 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| | If you have any feedback on how we can make our new website better please do contact us. We would like to hear from you. | |
|
|
 |
 |
|
|
|
 |
 |
 |
T3 Technology Material Safety Data Sheet for Epoxy Resin
IDENTIFICATION SECTION
PRODUCT NAME: T3 Technology Epoxy Resin.
MANUFACTURER: T3 Technology Malabar, FL 32950
HAZARDOUS MATERIAL DESCRIPTION: Epoxy Resin
USE: Composites and Coatings
Emergency Nos. FL (321) 704-9276
HAZARDOUS INGREDIENTS
CAS#: None
CHEMICAL NAME: Epoxy Resin
PERCENT: 100%
EXPOSURE LIMITS: None Assigned
PHYSICAL DATA
PHYSICAL STATE: Clear colorless liquid
SPECIFIC GRAVITY: 1.10
VOLATILE PERCENT: 0%
VAPOR DENSITY: Non volatile
BOILING POINT: N/A
EVAPORATION RATE: Non volatile
FIRE AND EXPOLSION DATA
FLASH POINT: None
FLAMMABILITY CLASSIFICATION: N/A
EXTINGUISHING MEDIA: Foam, CO2, dry chemical, or fog
SPECIAL FIRE FIGHTING PROCEDURES: Firefighters should wear goggles and self contained breathing apparatus to avoid inhalation of smoke or vapors.
FIRE AND EXPOSION HAZARDS: None known
REACTIVITY DATA
STABILITY: Stable
INCOMPATIBILITY: Strong oxidizers, acids, bases and epoxy hardeners under uncontrolled conditions.
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID: Heat and warm storage
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2, smoke
HEALTH HAZARD DATA
Effects of overexposure
EYES: Mild to moderate irritation, possible minor temporary corneal damage.
SKIN: Mild irritation. May be a skin sensitizer.
INHALATION: May cause nasal irritation, central nervous system depression or lung injury.
EMERGENCY FIRST AID PROCEDURES
EYES: flush with plenty of water and get medical attention.
SKIN: Promptly wipe clean with paper or cloth and wash with soap and water. Remove and wash any contaminated clothing before reuse.
INHALATION: If ill effects occur remove person to fresh air, keep that person warm and quiet and get medical attention immediately.
INGESTION: Not likely a problem. If large amounts are swallowed, promptly induce vomiting and get medical attention.
CARCINOGENICITY: Not carcinogenic.
MEDICAL CONDITIONS AGGREVATED BY EXPOSURE: None known
SPILL OR LEAK PROCEDURES
IF MATERIAL IS SPILLED: Ventilate area. Absorb spill with suitable absorbent material and place into a closed container. For large spills, dike area and pump into closed containers. Prevent this material from entering waterways. Wear protective equipment during cleanup.
WASTE DISPOSAL METHOD: At this time, this material or its containers would not be considered hazardous wastes as defined under the federal RCRA regulations (40 CFR 261) if discarded. Care should be taken to ensure that the material or its containers are disposed of in an approved facility in accordance with current federal, sate, and local regulations.
For further information, contact your state or local waste agency or the U.S. Environmental Protection Agency’s RCRA hotline at 1.800.424.9346 or 202.382.3000.
SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: Should be worn to avoid breathing spray mist, heated vapors or if TLV is exceeded.
VENTILATION: Local exhaust and general ventilation recommended.
SKIN PROTECTION: Chemical resistant plastic or rubber gloves and chemical goggles.
OTHER PROTECTIVE EQUIPMENT: As required to prevent wetting skin or clothing.
SPECIAL PRECAUTIONS
PRECAUTIONS WHEN MIXING AND HANDLING: This material may cause skin sensitization. Do not get in eyes, on skin or clothing. Do not allow contaminated clothing to contact skin. Avoid contact with vapors. Wear protective equipment.
SUPPLEMENTAL INFORMATION
REGULATORY INFOMRATION: None
SARA HARZARD CLASSIFICATION: This material has been categorized as having the following hazards as defined by SARA title III regulations (40 CFR 370): acute, chronic.
SARA SECTION 313 LISTED INGREDIENTS: This material does not contain any substance which is subject to the reporting requirements of 40 CFR 372.
DOT PROPER SHIPPING NAME: Not regulated by DOT.
UN NUMBER: None
DOT HAZZARD CLASS: None
T3 Technology Material Safety Data Sheet for Epoxy Resin Hardener
PRODUCT NAME: T3 Technology Hardener.
MANUFACTURER: T3 Technology Malabar, FL 32950
HAZARDOUS MATERIAL DESCRIPTION: DOT corrosive liquid UN 2289
EMERGENCY NOS. (321)704-9276
HAZARDOUS INGREDIENTS
POLYAMINE PREPOLYMER- 60%
BENZYL ALCOHOL- CAS #100-51-6- 30%
NON REACTIVE SOLIDS-30%
PHYSICAL DATA
PHYSICAL STATE: clear colorless liquid
SPECIFIC GRAVITY: .98
VAPOR PRESSURE: not determined
VAPOR DENSITY: not determined
BOILING POINT: not determined
WATER SOLUBILITY: not determined
MELTING POINT: n/a
EVAPORATION RATE: slower than either
FIRE AND EXPLOSION DATA
FLASH POINT: 220 DEGREES F
EXTINGUISHING MEDIA: Alcohol foam, dry chemical, carbon dioxide.
SPECIAL FIRE FIGHTING PROCEDURES: Self contained breathing apparatus should be available for fire fighters. Cool exposed containers with water.
FIRE AND EXPOSION HAZARDS: Toxic fumes will be evolved when this material is involved in a fire.
REACTIVITY DATA
STABILITY: Stable
IMCOMPATIBILITY: Strong acids or oxidizing agents. Epoxy resins under uncontrolled conditions.
HAZARDOUS POLYMERIZATION: Will not occur.
HAZARDOUS DECOMPOSITION PRODUCTS: CO, CO2, NOX
HEATH HAZARD DATA
EFFECTS OF OVEREXPOSURE: DOT corrosive. May cause burns to skin and eyes. High concentration of vapors cause irritation of respiratory tract, nausea and vomiting.
CHRONIC: Prolonged or repeated exposure may cause asthma and sensitization of skin other allergic response.
EYES: Immediately flush with large amounts of water for at least 15 minutes lifting upper and lower lids occasionally. GET IMMEDIATE MEDICAL ATTENTION. If a physician is not immediately available, continue flushing with water.
SKIN: Immediately flush skin with water for at least 15 minutes while removing contaminated clothing and shoes. Launder clothing before re-use and discard contaminated leather articles. Get medical attention if swelling or reddening occurs.
INHALATION: Remove to fresh air if effects occur and administer oxygen if necessary. GET MEDICAL ATTENTION if effects persist.
INGESTION: DO NOT INDUCE VOMITING. Vomiting will cause further damage to the throat. Dilute by giving water or mild to drink if victim is conscious. GET MEDICAL ATTENTION IMMEDIATELY.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Not known.
SPILL OR LEAK PROCEDURES
IF MATERIAL IS SPILLED: Avoid all skin contact. Absorb spills with clay, diatomaceous earth, vermiculite or other suitable absorbent material and shovel into waste metal drums.
WASTE DISPOSAL METHOD: Incinerate or bury in approved dumping area in accordance with Federal, State, and local regulations.
SPECIAL PROTECTION INFORMATION
RESPIRATORY PROTECTION: NIOSH Approved respiratory protection required in absence of proper environmental control. Use amine respiratory cartridge mask or an atmosphere supplying respirator.
VENTILATION: Breathing of vapors should be avoided. This product should be confined as far as possible in sealed or covered containers in which case normal room ventilation should be adequate. Local ventilation will be needed in areas where vapors are expected.
SKIN PROTECTION: Rubber gloves, clean, body covering clothing and footwear.
OTHER PROTECTIVE EQUIPTMENT: Splash proof goggles or safety glasses with side shields.
SPECIAL PRECAUTIONS
Avoid all skin contact.
Avoid spills and inhalation of vapors.
A good standard of personal hygiene and good general housekeeping are essential.
Reseal partially used containers after use.
Ensure all containers are correctly labeled to prevent accidental ingestion.
Wash with soap and water before eating, drinking, or using lavatory.
Observe conditions of good industrial hygiene and safe working practice.
|
 |
| |
 |
|
